M1 Synthetic Engine Oil, 1L

• High-output four-stroke petrol engines in passenger cars and SUVs
• Light commercial vehicles
• Hot-climate driving and sustained high loads
• Engines with multi-valve heads, or turbocharged engines with an intercooler
• High-mileage engines that burn or lose some oil
• Performance and sport driving where the oil runs very hot

• Dependable protection for heavily loaded parts at high operating temperature
• Detergency that helps keep the engine clean and supports engine life
• Good shear stability, so the oil film holds under heavy load
• Oxidation resistance that supports service intervals set by the maker
• Helps limit oil consumption in high-mileage engines

• API CF-4/SM, as printed on the label
• SAE 20W-50 viscosity grade
• Suitable where an API CF-4/SM, 20W-50 oil is specified
• Always check the grade and specification in your vehicle or equipment handbook before use.

Before using this product, check that it matches the equipment maker’s recommendations and your maintenance practice.

• Store the tin indoors in its original, tightly closed container, in a cool, dry place.
• Keep it out of direct sunlight and away from heat, open flames and sources of ignition.
• Keep out of reach of children. Do not swallow, and wash hands with soap and water after contact.
• Do not mix with other oils unless the maker says they are compatible.
• Collect used oil and take it to an authorised collection point. Never pour it into drains, onto the ground or into water.